Overview
The Pluto ST11 is a versatile base board equipped with interfaces (GbE, USB 2.0/3.0, MIPI, etc.) and features (boot mode selection, IO headers, etc.) that expose the functionality of the installed Pluto family SoM. With the ST11 base board, the user can choose the Pluto family SoM installed, then experiment with the SoM to quickly verify, set-up proof of concept demos or even integrate it within a larger system.
Highlights
- Compatible with all Pluto SoC modules
- Mini DisplayPort for video applications
- USB 3.0 Type A
- Gigabit Ethernet
- 4 x MIPI interfaces for camera and display applications
- Suitable for prototype to series production
- Board size 100 x 100mm
Benefits
- High-Speed FPGA and flash programming over USB from a host PC
- Provides versatile set of I/O connectivity options specialized for and a board spectrum of applications (video, AI, measurement and instrumentation equipment)
Features
- Mini DisplayPort for video applications
- USB 3.0 Type A
- Gigabit Ethernet
- M.2 slot available for Wi-Fi connectivity
- 4 x MIPI interfaces for camera and display applications
- FTDI USB 2.0 High-Speed device controller
- Suitable for prototype to series production
- Board size 100 x 100mm
- Pmod I/O headers
- 0.1’’ header connector for I/O interfacing
- microSD card holder
- 12V single supply
Please note that the available features depend on the equipped Pluto SoC module.
Board Architecture
Click image to enlarge
Product Selection Matrix
| Product Code | Temperature Range | Status |
|---|---|---|
| PL-ST11-XZU20-3EG-2W-M-D4 | -20 to +70°C |  |
| PL-ST11 | -20 to +70°C | |
Key: 
Mass Production 
Sampling Contact us
Target Applications
- Sensing
- Remote systems
- Industrial controls
Information on the product may change, please check the manufacturers website and page for the most up to date information, see the link at the top right of this page.
